Screw On Wire Connectors — WLE-P11 to WLE-P17
Double wings screw on wire connectors — models WLE-P11 / WLE-P12 / WLE-P13 / WLE-P15 / WLE-P17
Dimensions, suitable wire ranges, and colors are exactly as provided
Wing grip for faster twist-on; no crimping or heat
See the Series Table below; install steps & FAQ at the end
Overview
WLE Series screw on wire connectors with twist-on installation. The table lists the five models in this group and their dimensions, suitable wire ranges, and standard colors.
Series Table
| Model | Height (mm) | Width (mm) | D (mm) | Suitable Wire | Color |
|---|---|---|---|---|---|
| WLE-P11 | 25.4 | 18 | 9.5 | 0.5–2.5 mm² (AWG22–14) | Yellow |
| WLE-P12 | 27.7 | 17.8 | 10 | 0.5–4 mm² (AWG22–12) | Taupe |
| WLE-P13 | 30.5 | 23.1 | 12 | 1.0–6 mm² (AWG18–10) | Red |
| WLE-P15 | 32.6 | 25.5 | 14.6 | 1.0–10 mm² (AWG18–8) | Grey |
| WLE-P17 | 39.5 | 31.7 | 17.8 | 2.5–16 mm² (AWG14–6) | Blue |
Installation
- Strip conductors as required.
- Align tips evenly; do not pre-twist.
- Twist clockwise using the wings for grip until firm resistance.
- Pull-test each conductor.
FAQ
Are these double wings models waterproof?
No. These are double wings screw on wire connectors. For sealed splices, use the waterproof (gel-filled) series.
Do they require special tools?
No crimp or heat tools are needed. Twist by hand and perform a pull test after installation.
Can they be used with aluminum conductors?
Use with copper conductors only.
