Twist-On Wire Connectors — WLE-P71 to WLE-P78
Twist on wire connectors for copper splicing — models WLE-P71 / WLE-P72 / WLE-P73 / WLE-P75 / WLE-P78
Dimensions & suitable wire ranges are listed exactly as provided
One-step twist-on workflow (strip → align → twist → pull-test)
See the Series Table and Per-Model Details below
Overview
This page lists twist on wire connectors in models WLE-P71, WLE-P72, WLE-P73, WLE-P75, and WLE-P78. The table below reproduces your data exactly.
Series Table
| Model | Height (H, mm) | Width (W, mm) | Diameter (D, mm) | Suitable Wire |
|---|---|---|---|---|
| WLE-P71 | 15 | 9 | 7 | AWG 22–18 |
| WLE-P72 | 18 | 10 | 8 | AWG 18–16 |
| WLE-P73 | 23 | 11 | 10 | AWG 16–14 |
| WLE-P75 | 28 | 15 | 13 | AWG 14–12 |
| WLE-P78 | 32 | 18 | 14 | 10–16 mm² |
Installation
- Strip conductors as required for the connection.
- Align the tips evenly; do not pre-twist.
- Twist the connector clockwise until firm resistance.
- Perform a pull test on each conductor.
FAQ
Are these models waterproof?
No. This page lists twist on wire connectors WLE-P71 to WLE-P78. For sealed outdoor splices, use the waterproof (gel-filled) series.
Do they require special tools?
No special tools are needed. After twisting on, always perform a pull test.
Can they be used with aluminum conductors?
Use with copper conductors only.
Where can I find packaging, colors, or certifications?
Share those fields and they will be added as dedicated rows without assumptions.
