Brass Terminal Block — T006 Series
High-conductivity brass bar on insulated nylon stand for neutral/earth distribution.
7–24 ways; bore 6×9 mm, screws M5, hole Ø 5.5 mm.
Tall stand design for easy cable entry and labeling.
Ideal for distribution boards, control panels, and OEM switchgear
Overview
The brass terminal block T006 uses a tall insulated stand to create generous tool clearance and neat cable routing in distribution boards and control panels.
Machined from solid brass, brass terminal block T006 provides low contact resistance, stable torque, and fast inspection even with dense wiring.
All versions share a 6×9 mm bore with M5 screws and Ø5.5 mm hole, while capacities range from 7 to 24 ways.
When panel builders need a reliable neutral/earth consolidation point with improved access, brass terminal block T006 delivers a dependable footprint that integrates with standard accessories.
Key Features
- Solid corrosion-resistant brass conductor for low resistance and thermal stability.
- Raised insulated stand improves screwdriver access and labeling visibility.
- Uniform spec across the range: 6×9 mm bore, M5 screws, Ø 5.5 mm.
- Available in 7, 8, 10, 12, 13, 15, 16, 18, 20, 24 ways for flexible layouts.
- Works as neutral (N) link or earth (PE) bar; simple re-torque procedures.
Specifications
| Article No. | Ways | Spec (mm) | L1 (mm) | L2 Installation (mm) | Screw | Ø (mm) | Remark |
|---|---|---|---|---|---|---|---|
| T006-0609/7 | 7 | 6×9 | 50 | 35×8.5 | M5 | 5.5 | T006-0609/7B, T006-0609/7G |
| T006-0609/8 | 8 | 6×9 | 60 | 35×8.5 | M5 | 5.5 | T006-0609/8B, T006-0609/8G |
| T006-0609/10 | 10 | 6×9 | 73 | 35×8.5 | M5 | 5.5 | T006-0609/10B, T006-0609/10G |
| T006-0609/12 | 12 | 6×9 | 86 | 35×8.5 | M5 | 5.5 | T006-0609/12B, T006-0609/12G |
| T006-0609/13 | 13 | 6×9 | 90.5 | 35×8.5 | M5 | 5.5 | T006-0609/13B, T006-0609/13G |
| T006-0609/15 | 15 | 6×9 | 105.5 | 35×8.5 | M5 | 5.5 | T006-0609/15B, T006-0609/15G |
| T006-0609/16 | 16 | 6×9 | 112 | 35×8.5 | M5 | 5.5 | T006-0609/16B, T006-0609/16G |
| T006-0609/18 | 18 | 6×9 | 125 | 35×8.5 | M5 | 5.5 | T006-0609/18B, T006-0609/18G |
| T006-0609/20 | 20 | 6×9 | 138 | 35×8.5 | M5 | 5.5 | T006-0609/20B, T006-0609/20G |
| T006-0609/24 | 24 | 6×9 | 164 | 35×8.5 | M5 | 5.5 | T006-0609/24B, T006-0609/24G |
Dimension
Applications
Use brass terminal block T006 in consumer units, OEM control cabinets, machine panels, and PV sub-assemblies where raised access is beneficial and wiring density is high.
Selection Guide
Choose lower way counts for compact boards; select 18–24 way brass terminal block T006 when many branch circuits must be consolidated with minimal jumpers.
Installation
Mount the stand on a flat surface, verify earthing strategy, and route feeders before tightening.
When space is tight, brass terminal block T006 can sit near the incoming neutral or PE stud to simplify labeling and testing.
Maintenance
Re-torque terminal screws on scheduled intervals, inspect contact surfaces, and verify base fasteners.
With these checks, brass terminal block T006 maintains consistent performance over years of thermal cycling.
FAQ
What are the common specs across T006?
All models use 6×9 mm bores, M5 screws and Ø5.5 mm holes on a raised insulated stand.
Neutral or earth?
Both. Wire as a neutral link (N) or an earth bar (PE) depending on your panel design.
Any torque guidance?
Apply the manufacturer-standard torque for M5 screws and re-check after initial thermal cycles during routine maintenance.
