Cable Tie Mount — Self-Adhesive Nylon Cable Tie Base
Self-adhesive cable tie mount for quick, drill-free bundling on metal, plastic and painted panels.
UL-approved Nylon 66 (UL94V-2) base; strong tape backing for reliable holding.
Tie-through path supports standard nylon cable ties; choose a tie width smaller than hole T.
Square sizes 20×20 / 25×25 / 30×30 / 40×40 with defined mounting hole D and tie hole T.
Cable Tie Mount — Self-Adhesive Nylon Cable Tie Base
Self-adhesive cable tie mount for fast, drill-free bundling. UL-approved Nylon 66 base with strong tape backing and a clean tie-through path. Choose a cable tie width smaller than the hole T.
Overview
The cable tie mount provides a flat, adhesive-backed platform to secure nylon cable ties on panels and enclosures without drilling.
Tear off the release liner, press the mount onto a clean surface, and thread the tie through the center to bundle cables neatly.
Key Features
- Material: UL Nylon 66 (natural) with UL94V-2 flammability rating.
- Back: industrial adhesive tape for quick, drill-free installation.
- Tie-through design: supports standard nylon cable ties; select tie width < hole T.
- Square sizes for layout flexibility: 20×20 / 25×25 / 30×30 / 40×40.
How to Use
- Peel the release paper and press the cable tie mount firmly onto a clean, dry surface (metal, coated sheet, plastic, etc.).
- Thread the cable tie through the center slot, route around the cables, then tighten.
- For best results, apply at room temperature and allow the adhesive to wet-out before loading.
Specifications
| Item No. | L × W (mm) | H (mm) | Mounting Hole D (mm) | Cable Tie Hole T (mm) |
|---|---|---|---|---|
| JG-20S | 20 × 20 | 6.1 | 2.9 | 4.5 |
| JG-25S | 25 × 25 | 7.5 | 3.5 | 5.0 |
| JG-30R | 30 × 30 | 8.7 | 4.5 | 5.5 |
| JG-40R | 40 × 40 | 6.4 | 5.2 | 6.0 |
Tip: the cable tie width should be less than the hole (T) size.
FAQ
Will the adhesive hold on powder-coated metal?
Yes, provided the surface is clean and dry. Wipe with isopropyl alcohol, press firmly, and allow time for the adhesive to wet-out before applying load.
What cable tie size should I use?
Select a tie width smaller than the T dimension in the table (e.g., T=5.0 mm works with a 4.6 mm wide tie).
